Maintenance and correct operation of pellet plant
In the usual operation of pellet plant, machine maintenance problems are inevitable. Although there are strict rules and detailed steps of maintenance on the production specifications of the pellet plant, the maintenance methods varies with different operators. Below is the maintenance method of pellet plant in idle period.
Get to know how to start the pellet plant
1, Prevent damp of pellet plant internal parts.If the motor of pellet plant is not used for a long time, it must be removed and stored in a clean, dry and ventilated place. Do not put it in the wet place in order to avoid being affected with damp and decreasing of insulation, which would make the motor in short circuit, leakage and so on.
2, The machine should be placed in the dry and ventilated place when not use. Because the pellet plant is made of iron and easy to rust after placing for a long time, which would greatly shorten the life of pellet plant equipment.
3, Prevent the equipment aging. The rubber parts and other non-steel parts would crack if touched with oil or affected with damp without time treatment. Remove the belt on the belt conveyor and cover its surface with plastic wrap and then stored in a dry place. Equipment like large tires can be raised by the jack to keep a certain distance with the ground.
Then, how to correctly operate the pellet plant?
1, Before starting the pellet plant, check whether there is any lack of spare parts and whether the wire is in good condition to avoid the risk in the running of pellet plant;
2, Do not increase the rotating speed randomly. When the pellet plant is running, make sure that each part of safety protection device is normal and not allowed to remove it;
3, Minors, the elderly and other non-specialized personnel are forbidden to operate the pellet plant. It is strictly prohibited for the operators to work in spite of illness or fatigue or after drinking. Leave the working post without permission is also prohibited. Be sure to cut the power supply of pellet plant when leaving and prevent children getting near it;
4, When feeding, it is forbidden to put hands into the hopper to stir materials, in order to avoid the material from being brought into machines and cause unnecessary body injury;
5, When an abnormal sound is found, the operator should cut the power immediately to check and troubleshooting;
6, The work site should be spacious and equipped with regular fire prevention equipment;
7, It is forbidden to use metal for stirring, the material must not be mixed with any iron, screws and other metal;
8, grounding device must be installed when using the motor so as to avoid leakage and electric shock phenomenon.
---------------------------------------------------------------------------------------------------------------------------------------------
News
- How to make biomass pellets?
- What are the reasons for different length of biomass pellets?
- Easily blocked parts of biomass pellet machine should be cleaned regularly
- How to improve the die life of wood pellet mill?
- How to adjust the pellet length of wood pellet mill?
- Four tips for making high quality pellets with biomass pellet machine
- The factors affecting the production speed of biomass pellet machine
- The use and precautions of the ring die in wood pellet mill
- The structure and working principle of ring die pellet machine
- What's the reason for abnormal noise or sudden stop of biomass pellet machine?
- The production process of biomass pellet plant
- Pellet machine makes the pollution become resource
- What is biomass pellet fuel?
- How to distinguish the quality of accessories in pellet machine?
- The advantages and application of pellet machine
- Make biomass energy with pellet machine
- Ring die adjustment of sawdust pellet making machine
- The performance difference between flat die pellet machine and ring die pellet machine
- Does the weather change affect biomass pellet machine?
- An effective solution to output reduction of pellet machine
- Advantages of pellet machine
- Solutions to the appearance abnormality of pellet produced by pellet machine
- Five advantages of pellet machine
- How to make the service life of die in pellet mill longer?
- Matters needing attention in the application of pellet mill