How should the ring die of pellet plant be stored?
Ring die is one of the important parts in the pellet plant. It is mainly used for the forming of pellets. One set of pellet machine can be equipped with more ring die.
1. After storing the ring die of pellet plant for six months, the oil filler inside must be replaced, because the materials inside would harden if storing too long, resulting in blocking of pellet machine.
2. The ring die should be placed in a dry, clean and ventilated place. It can be coated with a layer of waste engine oil on the surface if not being used for a long time, so as to prevent corrosion of water in the air. Usually, there are a lot of raw materials in the production workshop and do not put the ring die there, because the raw material is particularly easy to absorb moisture and not easy to disperse. If the raw material and ring die are put together, it would accelerate the corrosion of ring die, which affects its service life.
3. If the ring die need to be removed from the biomass pellet machine in the production, use the oily material to extrude all the material out of the machine before stopping the pellet plant to ensure smooth discharging of materials from the die holes in the production of next time. If not filling with oily materials, it would lead to corrosion of ring die in long time storage because the production materials contain a certain amount of moisture, which would accelerate the corrosion of the die and make it rough, affecting the discharge of material.
Biomass pellet machine can be used in processing of many materials, such as corn stalks, sawdust, branches, bark, straw, cotton stalks, peanut shells, medicine residue as well as agricultural and forestry waste. Sawdust pellets made of different raw materials are different. The pellet fuel produced by corn straw, sawdust, branches and bark has higher carbon content, because the carbon content of raw material itself is higher. The pellet is mainly used as fuel due to the high calorific value and high density. Pellets produced by peanut shells, cotton stalks and straw can be used as feed, which is very convenient to transport and can be preserved for a long time.
------------------------------------------------------------------------------------------------------------------------------------------------------
News
- How to make biomass pellets?
- What are the reasons for different length of biomass pellets?
- Easily blocked parts of biomass pellet machine should be cleaned regularly
- How to improve the die life of wood pellet mill?
- How to adjust the pellet length of wood pellet mill?
- Four tips for making high quality pellets with biomass pellet machine
- The factors affecting the production speed of biomass pellet machine
- The use and precautions of the ring die in wood pellet mill
- The structure and working principle of ring die pellet machine
- What's the reason for abnormal noise or sudden stop of biomass pellet machine?
- The production process of biomass pellet plant
- Pellet machine makes the pollution become resource
- What is biomass pellet fuel?
- How to distinguish the quality of accessories in pellet machine?
- The advantages and application of pellet machine
- Make biomass energy with pellet machine
- Ring die adjustment of sawdust pellet making machine
- The performance difference between flat die pellet machine and ring die pellet machine
- Does the weather change affect biomass pellet machine?
- An effective solution to output reduction of pellet machine
- Advantages of pellet machine
- Solutions to the appearance abnormality of pellet produced by pellet machine
- Five advantages of pellet machine
- How to make the service life of die in pellet mill longer?
- Matters needing attention in the application of pellet mill