Go Greener with KMEC Biomass Pellet Mill & Pellet Plant

How to improve the work efficiency of pellet mill

People all hope that their pellet mill work with high efficiency, but the situation is not satisfied most of the time. Then what’s the reason for that? In fact, many clients are not satisfied with their work efficiency due to their improper operation of pellet mill. As for the problem during using of pellet mill, we surmised many years production experience and combined with the clients responding information, to introduce several tips about improving the work efficiency of pellet mill.
 
Biomass Pellet Mill

1. It is necessary to choose the proper aperture of die hole. Some clients use the small aperture of die holes, it often leads to low yield or produce without discharging. So the purchaser should consult the sellers about the size of the die hole during purchasing.
2. Adjust the clearance between the die and roller of pellet mill. Proper pressure makes the pellet good in the aspect of curing degree and densification. There are two adjustment screws on the feed pellet mill. Adjust the pressure screws at the two sides of pellet mill to keep balance and tighten up the screws.
3. Keep the pellet mill clean. If the users pay attention to the clearness of pellet mill, it accelerates the service life of pellet mill. Therefore, keep the pellet mill clean. The best way is to clean it regularly.  
4. Keep the lubrication of pellet mill regularly. Add the grease, lubricant oil regularly. Clean the die regularly. Adding the grease could increase the efficiency of pellet mill.
 
KMEC is the professional manufacture of pellet mill. We always quest for perfection with continuous creation. Warmly welcome everyone to visit our company and make business negotiation. 

-----------------------------------------------------------------------------------------------------------------------------------------------------

f you have many waste thing like grass, sawdust, wood log or any other organic materials, you don’t know how to deal with it or just through them away directly before. But it still needs to pay for money and energy for that process. Also it is big waster for materials.