Repair and common problems of sawdust pellet mill

It is necessary to maintain the sawdust pellet mill regularly during using, it can avoid of production decreasing effectively and delaying the production schedule, also it can improve the service life of machine.

The measures for maintaining of sawdust pellet mill include:
1. Timely replace the lubricant oil of each part of pellet mill and clean the dust on the equipment, to avoid of dirty things entered into the lubricant parts to destroy the machine. 
2. during using of pellet mill, the machine can not be operated overload within long period of time. The machine should have a rest properly to improve the service life of machine.
3.The wearing condition of the mold should be examined regularly. If the mold is out of use, the new mold should be replaced. The bad quality mold can not be used. Though the price for low quality mold is low, it is easy to go wrong, and may destroy other parts which lose more than gain.
Timely clean the bearing of compression roller of the mold, and it can be cleaned with Petrol or diesel oil, as well as adding lubricant oil.
5. after the sawdust pellet mill has been used for a period of time, each of the connecting parts should be examined. Timely screw the loosening parts to avoid of mechanical accident.


Reand:How to make wood pellets

During the using of sawdust pellet mill, several issues should be concerned:
1. Before feeding into the pellet mill, the feedstock should examined fully, to forbid entering of hard thing and iron slab into the machine to destroy the spare parts of machine.
The machine should be operated by professional operator, to avoid of operation of green hand.
2.The machine should be operated by professional operator, to avoid of operation of green hand.
3. If the machine has abnormal sound or the temperature is high, it is necessary to stop the machine. Start up the machine when the reason for failure has been found. High temperature of the machine is mainly due to the overload of the machine, the machine should be stop properly to lowering the temperature before using.
4. as for the newly purchased machine, it is necessary to check up the concrete of the basis. The sawdust pellet mill has high power capacity during operation; the machine is vibrated if the basis is not fixed firmly which may damage the machine. In addition, the machine body should be in horizontal vertical statement.
5. The newly replaced compression roller should be polished firstly and it can be operated by the manufacture’s Instructions for use. There are some burrs at the edge of the newly replaced mold. It may affect the pelletizing of pellet mill if it is used without polishing. 

-----------------------------------------------------------------------------------------------------------------------------------------------