Homemade wood pellet machine

Wood pellet machine is a kind of equipment to compress the woody waste into pellet without the bonding materials. As the development of biomass energy, requirement for homemade wood pellet machine are increasing day by day. It’s a kind of method to make waste into treasures.

 

Features of homemade wood pellet machine:

1.Wide suitability of materials, like sawdust, leaf, straw and other biomass materials.

2.Stable performance, high output and low power consumption. Simple maintaining, low failure rate, easy operation.

3.The machine is casting as an integer with firm structure and long life span, motor-driven pellet press or diesel engine-driven pellet press are available for choosing according to the clients requirements.

4.High temperature heat treatment of flat die and compressing rollers, lower cost of high resistance spare parts.

5.High ratio of molding and high density of pellets.

6.Diameter of pellet are ranged fromΦ6—Φ12, according to customers requirements.  

 

Attentions of operation:

1.The operators should read the instructions carefully and have good understanding of the character of the homemade wood pellet machine, structure and application method. Stall and debug, use and maintain the pellet machine according to regulations.

2.Before connect the power supply, examine the ground cable is fine or not at first. Connect to the power of the machine and start the pellet machine are serious prohibited before connected the ground cable

3.Don’t inspect or replace the spare parts with the live cables, or the operators can get a shock or injured.

4.Be sure to stop the pellet machine when the service man maintain the pellet machine, and cut off all the electricity supply and hang on the warning sign, to prevent human error accident from unexpected operation of machine.

5.Special lubricant should be added into the bearing of compression rollers of the pellet machine after every 12 hours of the operation of the pellet machine.

6.Please do cut off the electricity when rotating the compression rollers by hand. Please do not touch the rotating compression rollers and flat die by hand or other objects.

7.The clearance between the compression rollers and the flat die should below 10.mm, too small the clearance give rise to over wear resistance between compression rollers and flat die, even the damage of the whole pellet machine.

8.When the temperature of the homemade pellet press is below 10℃, the lubricant of the pellet mill are easy to freeze. Please warm the wood pellet mill to 10℃ and start the machine. 

 

KMEC are a professional supplier of series of homemade wood pellet machine. Our products are popular on the market. The primary products include, series flat die pellet mill, small pellet plant and ring die pellet mill production line etc. And our products have been exported to American, German, Russian, Brazil and other 50 countries. We welcome all the customers from all over the world to cooperate with us in the future.