Small Pellet Mill

Small pellet mill, also called homemade pellet machine or flat die pellet mill. It’s a kind of equipment which compress the material which are difficult to bonding and molding, for example, rice husk, shell of sunflower seed, peanut shell and various kinds of fruits shells, branch, tree trunk, tree bark and various kinds of wood waste; various kinds of crops straw; rubber, cement, lime-ash and various kinds of industrial chemicals. Our products have been exported to American, German, Russian, Brazil and other over 50 countries. Welcome to investigate our company and welcome criticism from all quarters, in order for better service to you!

Features of small pellet machine
1.Wide suitability of materials, like sawdust, leaf, straw and other biomass materials.
2.Stable performance, high output and low power consumption. Simple maintaining, low failure rate, easy operation.
3.The machine is casting as an integer with firm structure and long life span, motor-driven pellet mill or diesel engine-driven pellet machine are available for choosing according to the clients requirements.
4.High temperature heat treatment of flat die and compressing rollers, lower cost of high resistance spare parts.
5.High ratio of molding and high density of pellets.
6.Diameter of pellet are ranged fromΦ6—Φ12, according to customers requirements.

Attentions of operation：
1.The operators should read the instructions carefully and have good understanding of the character of the homemade wood pellet machine, structure and application method. Stall and debug, use and maintain the pellet machine according to regulations.
2.Before connect the power supply, examine the ground cable is fine or not at first. Connect to the power of the machine and start the pellet machine are serious prohibited before connected the ground cable
3.Don’t inspect or replace the spare parts with the live cables, or the operators can get a shock or injured.
4.Be sure to stop the pellet machine when the service man maintain the pellet machine, and cut off all the electricity supply and hang on the warning sign, to prevent human error accident from unexpected operation of machine.
5.Special lubricant should be added into the bearing of compression rollers of the pellet machine after every 12 hours of the operation of the pellet mill.
6.Please do cut off the electricity when rotating the compression rollers by hand. Please do not touch the rotating compression rollers and flat die by hand or other objects.
7.The clearance between the compression rollers and the flat die should below 10.mm, too small the clearance give rise to over wear resistance between compression rollers and flat die, even the damage of the whole pellet mill.
8.When the temperature of the homemade pellet mill is below 10℃, the lubricant of the pellet mill are easy to freeze. Please warm the pellet mill to 10℃ and start the machine.


Primary productions of KMEC: series of flat die pellet mill, crushing machine, ring die pellet mill production line etc. Feed pellet mill, straw pellet mill of our company are welcomed in the market and welcome the clients to purchase our products.