The nine major characteristics of wood pellet plant

Wood pellet plant takes pine, birch, poplar, fruit tree and crops straw, bamboo shavings pieces as raw material for the production of biomass pellet fuel. The moisture content of raw materials is required at about 15%, and the diameter of pellet can be customized can according to customer requirements. Pellets produced by the wood pellet plant can be used in combustion/barbecue and fireplace for heating with the calorific value of 4000-4500 calories, ash content of lower than 6% and water content below 8%. Complete biomass wood pellet plant includes crushing, drying, pelletizing, cooling, screening, packaging and computer control automatic production line.


 
Features of wood pellet plant produced by KMEC:
(1) Special designed main shaft and air shaft structure without having to worry about main shaft and air shaft deformation or fracture accidents.
(2) Long service life of roller and bearings with lifetime limit of more than 800 hours.
(3) Use big modulus gear, the design parameter is several times of the actual power. The service life of the gear is more than ten years.
(4) Special design of the enclosure structure and the weight of wood pellet plant is more than double the weight of the same type that ensures strong mechanical power.
(5) It solves the problem of cabinet and gear material expansion coefficient, ensures consistent of expansion coefficient of the cabinet and the of gear to keep the wood pellet plant running at optimum transmission condition.
(6) Set quick entrance of mold polishing material to prevent waste of polishing material and the pollution of polishing material to other mechanical parts.
(7) Special designed pressing chamber has low sensitivity to material moisture. Normal pelletizing can be made even when the material moisture is 10% higher than the same model, thus saves the drying cost of the raw material.
(8) The roller is optimized designed with the maximum diameter, it can maximize the extension of the service life of the roller.
(9) The ring die of special design and manufacture with 13 lines of opening holes, ￠6-8 effective opening width of 135 mm, which is 1.8 times of the the same wood pellet plant in domestic and foreign markets, effectively reduce the mold cost and the production cost.
 
Since its establishment, KMEC always provides quality wood pellet plant for users at home and abroad. Wood pellet plant based on renewable biomass fuel, and realizes the sustainable use of energy. Using high temperature section combustion technology with less emission of NOX and SO2 in the flue gas. There is no tar, waste water and waste emissions: using high temperature pyrolysis combustion technology, tar produced is burned directly in the form of gas, which solves the technical difficulty of high biomass gasification tar content, avoids the secondary pollution of water quality of washing tar. Biomass pellet plant produced by our company has simple operation, convenient maintenance with variable frequency automatic feeding and wind ash removal. The wood pellet plant is the best choice for enterprises.

-------------------------------------------------------------------------------------------------------------------------------------------------