What factors would affect the production efficiency of pellet plant

In the operation of pellet plant, multiple machines are working at the same time. The feeding and discharging are done automatically by the conveyor, which greatly reduces the human resources. Stable production of each pellet machine in the pellet plant should be guaranteed. keep the machine running at full capacity in the pursuit of the biggest production of single machine should be avoided, because when the pellet plant is running at full capacity, it is sensitive to the moisture content of materials and the grinding particle size. If there is certain difference with normal request, it may lead to discharge or forming instability so that manual adjustment is needed that increases the labor intensity and other machines will be affected in some ways! Thus, the load of each machine in the pellet plant should be controlled within the rated load to avoid unstable machine production caused by full load or overloaded operation to improve the production efficiency of the whole pellet plant.



1, There is a certain requirement on the size of the material. Before materials are fed into the pellet plant, the straw materials should be crushed by the hammer mill or other wood crusher machines, and the size of crushed materials is determined by the diameter of the biomass pellet you want to produce and the pore size of die in pellet plant. The size that materials been crushed will directly affect the production of pellet plant, even affect the normal discharging of pellet plant. However, the machine produced by each manufacturer are not the same and the requirements of material sizes are also different, customers should be clear of that before purchasing.

2, It is necessary that the material itself should have certain adhesive force. If material itself has no adhesive force, then biomass pellet produced by the pellet plant is formless or easy to broken in the transportation. Thus, if you found that materials with no adhesive can be pressed into biomass pellet or briquette, perhaps they are processed by fermentation or may be joined with the adhesive. This is also very important.

3, There are strict requirements on the moisture of material. After materials are fed into the pellet plant, it is necessary to maintain the moisture of material in a range after broken of raw material. Too dry of raw materials would affect the forming, while materials with too large moisture are easy to loose. Thus, the moisture content of material also affects the production of pellet plant. Although the moisture demand of materials is different for different manufacturers, the moisture content of finished products before selling is necessary to reach below 13%, which is the standard that keeps straw pellet products from getting mouldy or bad.
------------------------------------------------------------------------------------------------------------------------------------------------------