Lubricating oil of biomass pellet mill

Maintenance of biomass pellet mill is a quite necessary step to increase the output and extend the life span of pellet machine. Efficient and regular maintenance could improve the quality and increase the output of biomass pellet mill and achieve unexpected result in the production. However, what should we do to maintain the biomass pellet mill? As we know, the lubricating oil of the gear case should be changed at regular time, and the oil of new biomass pellet mill should be changed after operating for half a month, then change the lubricating oil every 1000 hours of continual operation later. However, what kind of lubricating oil should be used in the biomass pellet mill? Is any kind of lubricating oil suitable for biomass pellet mill? We would solve the questions in the following content.


 
First, the lubricating oil used in the biomass pellet mill is not the more the better: the amount of lubricating oil of a device has be strictly stipulated in the design, thus the operator should add the lubricating oil according to the directions and the daily observed oil standard. If too much oil is added in the biomass pellet mill, it would even bring in some opposite effects.
 
Second, not all lubricating oil are suitable for biomass pellet mill: in the design of a biomass pellet mill, the designer stipulates the lubricating oil used in the biomass pellet mill based on the mechanism of the pellet machine. As a result, not all lubricating oils have the lubrication effect on the biomass pellet mill. In order to make the equipment get reasonable lubrication in different environment, a certain amount of additives must be added within the lubricating oil. The additives used for each kind of lubricating oil are not identical and the performances are also different. Therefore, the appropriate lubricating oil should be used according to the situation of the biomass pellet mill and the environment to achieve a good lubrication effect.
 
Finally, do not use waste oil directly: waste oil produced by the biomass pellet mill can be recycled through oil analysis and some corresponding measures. But users must pay attention that do not add waste oil directly, which will damage to the biomass pellet mill. If the waste oil to be recycled contains certain amount of water, the oil-water separator can be used for dehydration; mechanical impurity and oil sludge in the lubricating oil can be removed through the filter.
 
Therefore, the operator should pay attention to the amount and type of lubricating oil in the maintenance of biomass pellet mill to make better use of the pellet machine. If you have any other questions about our biomass pellet mill or pellet plant, please feel free to contact us.
-----------------------------------------------------------------------------------------------------------------------------------------------------------